Alternativer
Colour
  • Transparent
  • Carbon Look
  • Black
  • Silver
  • White
  • Transparent Red
  • Red
  • Orange
  • Yellow
  • Green
  • Transparent Blue
  • Blue
  • Transparent Purple
  • Pink
Fitting One

Unless stated otherwise, all our fittings are compatible with both convex and concave fittings. If you need to orientate the fittings you can do this yourself: you simply grip the end of the hose and rotate the fitting in its seat to the angle you need.

Fitting One Angle

If you have a banjo or swivel fitting, we can bend it to the angle you need. If you have a fixed fitting, we can only supply these straight.

Fitting Two

Unless stated otherwise, all our fittings are compatible with both convex and concave fittings. If you need to orientate the fittings you can do this yourself: you simply grip the end of the hose and rotate the fitting in its seat to the angle you need.

Fitting Two Angle

If you have a banjo or swivel fitting, we can bend it to the angle you need. If you have a fixed fitting, we can only supply these straight.

Support One

The supports are not fixed on the hose, so you can mount them anywhere you want.

  • None
  • Single Bolt Locator
  • Double Bolt Locator
  • Circlip Small Nut
  • Circlip Large Nut
  • Rubber Grommet
  • Bobbin Grommet
Support Two

The supports are not fixed on the hose, so you can mount them anywhere you want.

  • None
  • Single Bolt Locator
  • Double Bolt Locator
  • Circlip Small Nut
  • Circlip Large Nut
  • Rubber Grommet
  • Bobbin Grommet
Heatshrink

If you want it, we can put a heatshrink around the ferrules.

  • None
  • Black
Length

If you aren't sure on the length, add 1-2cm to the total. It's better to have the hose slightly too long than too short.

Custom Brake Hose

kr 495,00 exc. mva: kr 396,00
LENGTH -
Specifications
Beskrivelse
Spesifikasjoner
Sertifisering

Beskrivelse

You can now create your own custom brake hoses, professionally hand-made to your exact specifications.

We expertly assemble each custom hose using non rusting stainless steel fittings, crimped directly to high performance stainless steel braided hose which is then protected with a wipe clean PVC cover available in a variety of colours.

Each custom hose is quality inspected before dispatch and they are suitable for use in all brake and clutch systems.

All our custom brake and clutch hoses include a lifetime warranty and are legal to fit to any vehicle worldwide.

Spesifikasjoner

Innvendig slangemateriale PTFE
Utvendig slangemateriale 303/304 Rustfritt stål med beskyttende PVC trekk
Monteringsdetaljer 303/304 Rustfritt stål
Temperaturområde -70°C to 260°C (-158°F to 500°F)
Innvendig diameter 3,5mm (0,138")
Utvendig diameter 7,5mm (0,295")
Maksimalt arbeidstrykk 290 Bar (4206 PSI)
Maksimalt trykk 870 Bar (12618 PSI)
Minimum radius på bøy 38mm (1,496")

Sertifisering

ABE KBA Tyskland, Østerrike, Sveits Se sertifikat
TÜV Tyskland Se sertifikat
Dekra Tyskland Se sertifikat
DOT United States Se sertifikat
FMVSS-106 Over hele verden Se sertifikat
SAE Over hele verden Se sertifikat
ADR Australia Besøk vår webside
NHTSA Over hele verden Besøk vår webside
Israel Mot Israel Besøk vår webside
NZTA New Zealand Besøk vår webside